EMT Practice Test

1. Question Content...

---

Question1: Which of the following fiber connector types is the most likely to be used on a network interface card?

Question2: Which of the following routing protocols uses an autonomous system number?

Question3: Which of the following requires network devices to be managed using a different set of IP addresses?

Question4: A network administrator for a small office is adding a passive IDS to its network switch for the purpose of inspecting network traffic. Which of the following should the administrator use?

Question5: Which of the following steps of the troubleshooting methodology should a technician take to confirm a theory?

Question6: An organization has a security requirement that all network connections can be traced back to a user. A network administrator needs to identify a solution to implement on the wireless network. Which of the following is the best solution?

Question7: A network technician was recently onboarded to a company. A manager has tasked the technician with documenting the network and has provided the technician With partial information from previous documentation.
Instructions:
Click on each switch to perform a network discovery by entering commands into the terminal. Fill in the missing information using drop-down menus provided.

Question8: Which of the following network devices converts wireless signals to electronic signals?

Question9: Which of the following should a network administrator configure when adding OT devices to an organization's architecture?

Question10: A network technician needs to resolve some issues with a customer's SOHO network.
The customer reports that some of the devices are not connecting to the network, while others appear to work as intended.
INSTRUCTIONS
Troubleshoot all the network components and review the cable test results by Clicking on each device and cable.
Diagnose the appropriate component(s) by identifying any components with a problem and recommend a solution to correct each problem.






Cable Test Results:
Cable 1:

Cable 2:

Cable 3:

Cable 4:

Question11: Which of the following most likely requires the use of subinterfaces?

Question12: A systems administrator is investigating why users cannot reach a Linux web server with a browser but can ping the server IP. The server is online, the web server process is running, and the link to the switch is up.
Which of the following commands should the administrator run on the server first?

Question13: A network engineer is now in charge of all SNMP management in the organization. The engineer must use a SNMP version that does not utilize plaintext data. Which of the following is the minimum version of SNMP that supports this requirement?

Question14: You are tasked with verifying the following requirements are met in order to ensure network security.
Requirements:
Datacenter
Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage Provide a dedicated server to resolve IP addresses and hostnames correctly and handle port 53 traffic Building A Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage Provide devices to support 5 additional different office users Add an additional mobile user Replace the Telnet server with a more secure solution Screened subnet Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage Provide a server to handle external 80/443 traffic Provide a server to handle port 20/21 traffic INSTRUCTIONS Drag and drop objects onto the appropriate locations. Objects can be used multiple times and not all placeholders need to be filled.
Available objects are located in both the Servers and Devices tabs of the Drag & Drop menu.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

Question15: A network administrator is notified that a user cannot access resources on the network. The network administrator checks the physical connections to the workstation labeled User 3 and sees the Ethernet is properly connected. However, the network interface's indicator lights are not blinking on either the computer or the switch. Which of the following Is the most likely cause?

Question16: A network administrator is configuring a wireless network with an ESSID. Which of the following is a user benefit of ESSID compared to SSID?

Question17: Which of the following attacks utilizes a network packet that contains multiple network tags?

Question18: Users cannot connect to an internal website with an IP address 10.249.3.76. A network administrator runs a command and receives the following output:
1 3ms 2ms 3ms 192.168.25.234
2 2ms 3ms 1ms 192.168.3.100
3 4ms 5ms 2ms 10.249.3.1
4 *
5 '
6 *
7 *
Which of the following command-line tools is the network administrator using?

Question19: Which of the following attacks would most likely cause duplicate IP addresses in a network?

Question20: Which of the following is a cost-effective advantage of a split-tunnel VPN?

Question21: After running a Cat 8 cable using passthrough plugs, an electrician notices that connected cables are experiencing a lot of cross talk. Which of the following troubleshooting steps should the electrician take first?

Question22: A network technician is troubleshooting a web application's poor performance. The office has two internet links that share the traffic load. Which of the following tools should the technician use to determine which link is being used for the web application?

Question23: Which of the following can support a jumbo frame?

Question24: Which of the following describes the best reason for using BGP?

Question25: A network administrator wants users to be able to authenticate to the corporate network using a port-based authentication framework when accessing both wired and wireless devices. Which of the following is the best security feature to accomplish this task?

Question26: A network manager wants to implement a SIEM system to correlate system events. Which of the following protocols should the network manager verify?

Question27: A network engineer receives a vendor alert regarding a vulnerability in a router CPU. Which of the following should the engineer do to resolve the issue?

Question28: A network engineer is designing a secure communication link between two sites. The entire data stream needs to remain confidential. Which of the following will achieve this goal?

Question29: To reduce costs and increase mobility, a Chief Technology Officer (CTO) wants to adopt cloud services for the organization and its affiliates. To reduce the impact for users, the CTO wants key services to run from the on-site data center and enterprise services to run in the cloud. Which of thefollowing deployment models is the best choice for the organization?

Question30: As part of an attack, a threat actor purposefully overflows the content-addressable memory (CAM) table on a switch. Which of the following types of attacks is this scenario an example of?

Question31: An administrator is setting up an SNMP server for use in the enterprise network and needs to create device IDs within a MIB. Which of the following describes the function of a MIB?

Question32: Which of the following network topologies contains a direct connection between every node in the network?

Question33: A network administrator has been taskedwith configuring a network for a newcorporate office. The office consists of twobuildings, separated by 50 feet with nophysical connectivity. The configuration mustmeet the following requirements:
. Devices in both buildings should be
able to access the Internet.
. Security insists that all Internet traffic
be inspected before entering the
network.
. Desktops should not see traffic
destined for other devices.
INSTRUCTIONS
Select the appropriate network device foreach location. If applicable, click on themagnifying glass next to any device whichmay require configuration updates and makeany necessary changes.
Not all devices will be used, but all locationsshould be filled.
If at any time you would like to bring backthe initial state of the simulation, please click the Reset All button.

Question34: You have been tasked with implementing an ACL on the router that will:
1. Permit the most commonly used secure remote access technologies from the management network to all other local network segments
2. Ensure the user subnet cannot use the most commonly used remote access technologies in the Linux and Windows Server segments.
3. Prohibit any traffic that has not been specifically allowed.
INSTRUCTIONS
Use the drop-downs to complete the ACL
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

Question35: A company receives a cease-and-desist order from its ISP regarding prohibited torrent activity. Which of the following should be implemented to comply with the cease-and-desist order?

Question36: A network administrator wants to configure a backup route in case the primary route fails. A dynamic routing protocol is not installed on the router. Which of the following routing features should the administrator choose to accomplish this task?

Question37: A technician is troubleshooting a user's laptop that is unable to connect to a corporate server. The technician thinks the issue pertains to routing. Which of the following commands should the technician use to identify the issue?